Moore FDY - EC Declaration of Conformity (EMC); EMC Directive Compliance; EC Declaration of Conformity (ATEX); ATEX Directive Compliance (Intrinsic Safety)

EC Declaration of Conformity


Moore Industries-International, Inc. Date Issued: 21 Oct. 2013
16650 Schoenborn Street No. 100-100-204 Rev. C
North Hills, CA 91343-6196 U.S.A. Page 1 of 2

Equipment Description:
PC-Programmable Frequency-to-DC Transmitter with Display
Model FDY / * / * / * / * / *
* Indicates any input, output, power, options and housing as stated in the product data sheet.
Directive:
2004/108/EC (EMC)
Specifications Conformed To:
EN 61326-1:2006
Electrical equipment for measurement, control and laboratory use - EMC requirements
Equipment Description:
PC-Programmable Frequency-to-DC Transmitter with Display
Model FDY / * / * / * / * / HP
* Indicates any input, output, power and options as stated in the product data sheet.
Directive:
94/9/EC (ATEX)
Provisions of the Directive Fulfilled by the Equipment:
Group II Category 1G EEx ia IIC T4
Notified Body for EC-Type Examination:
LCIE [Notified Body Number 0081]
33, av du Général Leclerc
92260 Fontenay-aux-Roses - France
EC-Type Examination Certificate:
LCIE 03 ATEX 6172 X
Standards and Technical Specifications Used*:
EN 50014:1997 + Amds 1 & 2
Electrical apparatus for potentially explosive atmospheres. General requirements.
EN 50020:2002 Electrical apparatus for potentially explosive atmospheres. Intrinsic safety ”i”.
*Note: The Requirements of these Standards were reviewed against Technical Standards
EN 60079-0:2009
Explosive atmospheres Part 0: Equipment - General requirements
EN 60079-11:2007 Explosive atmospheres Part 11: Equipment protection by intrinsic safety ”i”
and there are no significant changes relevant to this equipment or affecting the latest technical
knowledge for the product identified on this declaration.