Moore FDY - Default;Factory Configurations; Input Default Settings; Output Default Settings

FDY
8 The Interface Solution Experts
PC-Programmable Frequency
Transmitter and Display
Figure 5. All of the FDY Operating Parameters can be set from the Main Screen of the Confi guration Program.
1
2
3
4
5
6
7
Default/Factory Confi gurations
The following are the default factory settings for your
unit:
Input:
Measurement Mode: Frequency 0-100Hz
Input Hysteresis: 10mV
Timeout Period: 10s
AC/DC Input: AC
Low Pass Filter: Disabled
Averaging Filter: 8
Minimum Debounce Period: 10mS
Scaling Disabled
Output:
4-20mA
Damping: 0s
Fail Mode: High (23.6mA)
Display Mode: Primary Variable