-11-
click
2
3 4
5 6
7 8
Push the release switch toward the " " icon at the side of the floor brush to detach the buckle.
Grab the roller brush head and remove it out
from the floor brush.
Use cleaning brush to remove hair and strings
entangled on the roller brush.
Check the roller brush and make sure the
round side of it attach onto the plastic axle
first when assembling it back.
On the other side of the roller brush, please
make sure the arc-shaped part of it is downward
when assembling it back.
Insert the buckle back to place as the picture
shown.
A "click" will be heard if the buckle is inserted
in place.
To Next Page
Loading...
