What to do if dust is escaping from my Moosoo K12?
If dust is escaping from your Moosoo Vacuum Cleaner, it could be due to several reasons. First, ensure that the filter is correctly installed. Also, review the dust cup filter instructions to make sure the dust cup is properly installed. If there's a puncture or hole in the dust cup filter, replace it to prevent dust from escaping.
How to fix Moosoo K12 that will not operate?
If your Moosoo Vacuum Cleaner will not operate, there could be a few reasons. First, check for any electrical outages by inspecting the fuse or breaker. Also, the unit may need servicing; try replacing the fuse or resetting the breaker. Finally, the battery may need to be recharged or replaced.
Why is my Moosoo Vacuum Cleaner not picking up?
If your Moosoo Vacuum Cleaner isn't picking up dirt or the suction power is weak, the dust cup might be full. To resolve this, empty the dust cup and check the air duct for any obstructions. Also, the filter may need cleaning or replacement. Open the dust cup and clean the filter screen to ensure optimal performance.
Instructions for attaching the brush to the vacuum body first.
Instructions for removing and installing the dust cup.
Detailed methods for cleaning the dust cup and filter.
Guide to replacing and cleaning the filter for optimal performance.
Instructions for environmentally safe disposal of the vacuum and battery.
Information on warranty service and customer support contact.
Details on what the warranty covers and exclusions.
How to obtain warranty service and required information.
General| Charging Time | 4-5 hours |
|---|---|
| Dustbin Capacity | 0.6 L |
| Battery Type | Lithium-Ion |
| Battery Capacity | 2200mAh |
| Power | 120W |
| Suction Type | Cyclonic |
| Cord Length | Cordless |
| Type | Cordless Stick Vacuum Cleaner |
| Filtration System | HEPA Filter |
| Noise Level | ≤75dB |
To Next Page
