Moosoo K12 - Vacuum Cleaner Assembling; Attach the brush; Remove and install the dust cup

VACUUM CLEANER ASSEMBLING
WARNING: Always remove the plug from the power socket before fitting or remov-
ing accessories!
04
Attach the brush
To use your new Stick-Vac, attach the
brush to the body first.
Install the crevice tool as shown in the
figure.
Remove and install the dust cup
(a) To remove, rotate the dust cup in the
direction shown. (fig. A)
(b) To install, rotate the dust cup in the
direction shown. (fig.B).
Fig.A
Fig.B
MOOSOO K12 Basic Information
Model
Power
Input
Output
Working Voltage
Vacuum
Usage time
Charging period
K12
90W ( Brushless Motor )
100-240V˜50/60Hz 0.3A Max
14V 500mA
11.1V
12Kpa（High speed）/ 8Kpa（Low speed)
High speed：15min / Low speed：22min
About 4.5-5.5 hours