Enter the sleep mode
If no operation is performed in 10 minutes, the vacuum cleaner
automatically enters the sleep mode, and the power indicator
blinks every several seconds. In sleep mode, you can press any
button to wake up the vacuum cleaner.
Tips:
• When the vacuum cleaner is being charged at the docking
station, it cannot enter the sleep mode.
• If the sleep time exceeds 12 hours, the vacuum cleaner
automatically powers off.
Charge the vacuum cleaner
Auto mode: After completing cleaning, the vacuum cleaner
automatically returns to the docking station for charging.
Manual mode: In pause state, you can press the button
to activate the "Return to docking station" mode.
When the vacuum cleaner is being charged, the power indicator
blinks in breathing manner.
Tips:
If the vacuum cleaner fails to find the docking station, it
automatically returns to the starting point. In this case, you
need to manually put the vacuum cleaner back to the docking
station.
Reset the Wi-Fi settings
If your mobile phone fails to connect to the vacuum cleaner due
to reasons such as change of router settings and password
forgotten, re-pair the vacuum cleaner with the mobile phone
according to the Wi-Fi connection instructions.
Tips:
If the vacuum cleaner is in wait-to-connect state for more
than 2 minutes, its Wi-Fi function is automatically disabled.
To reconnect the vacuum cleaner to your mobile phone,
reset the Wi-Fi settings.
Faulty state
If the vacuum cleaner encounters a fault while working, the
power indicator blinks quickly in red, and a voice prompt is
generated. For details about troubleshooting method, see
"Troubleshooting".
Tip:
• In faulty state, if no operation is performed in 10
minutes, the vacuum cleaner automatically enters the
sleep mode.
• In faulty state, if the vacuum cleaner returns to the
docking station for charging, the current cleaning task is
stopped.
11
To Next Page
Loading...
