needed to check and replace
the temperature sensor;
Ice full icon
flashes (you
can still make
ice with this
phenomenon)
The temperature sensor
connection wire falls
off, breaks or internal
short circuit
Professionals are needed to
check and replace the
temperature sensor;
There is a
continuous
reminder that
the ice box is
not reset
See tips; Failure of ice
making box and its
internal driving
mechanism and detection
system;
Operate according to warm
prompts; Professionals are
needed to check and maintain;
Ice - making
mode operates
normally, no
ice or a small
amount of ice
The refrigeration
system is not stable in
operation; Ventilation
grille is blocked; Fan
not working or
refrigeration system
failure；
Continuous observation;
Remove objects near the
ventilation grille and dust
accumulation; Professionals
are needed to check and
maintain;
Difficulty or
inability to
shed ice
Low ambient
temperature; The ice
fell into the ice box,
causing the ice to
become too large for
reprocessing; Failure
of refrigeration system
and its control system;
Place in a suitable
environment; Operate
according to warm prompts;
Professionals are needed to
check and maintain;
Resonance; Internal
motion, control device
noise;
When making ice, the internal
electric components will
vibrate to ensure that no
other items near the ice maker
will be affected by the
vibration, resulting in
product resonance and noise.
Professional personnel are
needed for inspection and
maintenance.
LCD display
cracked or icon
missing
Professionals are required to
check and replace the control
board;
Recycling (Disposal of the product at the end of its life)
Waste Electrical Products Should Not Be Disposed Of With Household Waste. Please
Recycle Where Facilities Exist. Check With Your Local Authority For Recycling
Advice
To Previous Page
Loading...