MOOV MP15AI - Page 15

1
1 PIN3 100% 30~100%, by 5% increments
2 PIN2 80% 30~100%, by 5% increments
3 PIN1 40% 30~100%, by 5% increments
4 Backwash capacity 100% 80~100%, by 5% increments
5
Control mode of
Analog Input
0
0: current control
1: Voltage control
6
Enable or disable the
priming that occurs at
each start
25 25:enables 0: disables
7 Reserved 0 Not editable
8 System time 00:00 00:00 ~ 23:59
9
Preset 1 of the
skimmer mode
(skimmer cycle,
skimmer duration,
skimmer speed)
01:00
00:03
100%
Skimmer cycle: 1~24h, 1h for each step
Skimmer duration: 1~30min, 1min for
each step
Skimmer speed: 30%-100%, by 5%
increments
10
Time period of the
preset 1 of the
skimmer mode
7:00~21:00
Start time: 00:00~24:00
End time: 00:00~24:00
11 Speed limit 100%
60%~100%, by 5% increments
100% means no speed limit
12 RS485 address 170(0xAA)
160~190 (0xA0~0xBF),
each step by 1.
13
Time interval to
trigger the self-
learning automatically
0
0, 1, 3, 5, 7, 14, 21, 28 (day)
“0” means will not trigger the self-
learning automatically