Mopar Crate HEMI 392 - Important Safety & Emissions Information; Emissions Statement; Intended Use

Crate HEMI® Engine Kit Instruction Sheet www.mopar.com
Rev Level 5.0 – K6862625 4
Important Safety & Emissions Information
To prevent SERIOUS INJURY or DEATH:
 ALWAYS wear eye protection and appropriate protective clothing. You may be exposed to
flammable, corrosive and hazardous liquids and materials when installing an engine.
 ALWAYS secure the vehicle with the parking break or wheel chock before working on a vehicle.
 If you jack the vehicle, securely support the vehicle using jack stands before working under the
vehicle.
 Make sure you or the installer has the appropriate skills and the tool required to safely install
the engine.
 If you do not understand the instructions, call MOPAR for assistance at 1-888-528-HEMI (4364).
 NEVER modify wiring in the accelerator pedal system.
 DO NOT connect battery until all connections are made.
DO NOT start or run an engine in a closed garage or in confined area. Exhaust gases contain Carbon
Monoxide (CO), which is odorless and colorless. Carbon Monoxide is poisonous and can cause serious
injury or death when inhaled.
Follow the precautions below to prevent Carbon Monoxide poisoning:
 DO NOT inhale exhaust gases.
 NEVER run the engine in a closed area, such as a garage, and never sit in a parked vehicle with
the engine running for an extended period.
EMISSIONS STATEMENT
Intended Use:
CRATE HEMI ENGINES ARE DESIGNED FOR INSTALLATION IN
1. ANY MOTOR VEHICLE MANUFACTURED PRIOR TO MODEL YEAR 1976, AND
2. IN ANY VEHICLE THAT LACKS FEATURES CUSTOMARILY ASSOCIATED WITH SAFE AND PRACTICAL
HIGHWAY USE THAT IS OPERATED NOT ON A STREET OR HIGHWAY.
IT MAY BE A VIOLATION OF FEDERAL LAW SUBJECT TO CIVIL PENALTY TO INSTALL A CRATE HEMI ENGINE
IN ANY MOTOR VEHICLE DESIGNED FOR TRANSPORT ON A STREET OR HIGHWAY THAT WAS
MANUFACTURED IN MODEL YEAR 1976 AND LATER.