Need help?Do you have a question about the Morco FEB-24E UK and is the answer not in the manual?
General| Type | Combination Boiler |
|---|---|
| Central Heating Output | 24kW |
| Flue Type | Room Sealed |
| Boiler Type | Condensing |
| Mounting | Wall Mounted |
| Domestic Hot Water Output | 24kW |
| ERP Rating | A |
| Weight | 31 kg |
| Ignition | Electronic |
| Safety Features | Flame Failure Device, Overheat Thermostat |
Overview of the Fagor FEB-24E microprocessor-controlled gas combination boiler for heating and hot water.
Instructions for setting the time and on/off periods for the boiler's heating schedule.
Explanation of the red light indicating a boiler lockout and how to reset it.
Procedure for switching off the boiler using the main control switch.
Notes on how ambient temperature and flow rate affect domestic hot water output.
Details on the boiler's automatic safety shut-off and reset procedure.
Information on the automatic firing mechanism to prevent freezing.
Explanation of the device that prevents the pump from seizing during non-use.
Guidance on checking the boiler's system pressure via the gauge.
Advice on the importance and frequency of regular boiler maintenance.
Essential safety rules for operating the gas boiler.
Steps for draining the DHW circuit to prevent freezing during winter storage.
Description of the central heating system's expansion vessel.
Explanation of the switch preventing firing if air supply is faulty.
Details on the switch that prevents operation below 0.8 bar system pressure.
Information on the two thermistors controlling water temperatures.
Description of the thermostat that prevents overheating.
Overview of the boiler's electronic control features and capabilities.
Advice for users regarding gas type adaptation and correct installation.
Requirements and limitations for positioning the boiler within a building.
Specifications for the correct placement of the flue terminal.
Required space around the boiler for safe operation and servicing.
Guidance on ventilation for built-in boiler cupboards.
Information on the required electrical connection and earthing.
Requirements for the propane gas supply connection and testing.
Notes on connecting the appliance to sealed central heating systems.
Design considerations for heating systems and pump head.
Checks and advice for domestic hot water system connections.
Details of what is included in the boiler packaging.
Instructions and considerations for mounting the boiler.
Guidance on electrical connections and safety precautions.
Steps for connecting an optional external room thermostat.
Instructions for connecting the boiler to water and gas supplies.
Details on the standard horizontal coaxial air/flue kit and its installation.
Procedure for filling and checking the domestic hot water system.
Steps for filling, venting, and checking the central heating system.
Procedure for purging the gas circuit and checking for leaks.
Information regarding factory pre-set boiler adjustments.
Steps and warnings for the first time the boiler is operated.
Essential checks before starting the boiler's initial operation.
How to operate the boiler for domestic hot water supply.
Instructions for operating both heating and hot water services.
Procedure for safely switching off the boiler.
Explanation of the lock-out feature and its indicator light.
Final checks to ensure correct operation after installation and commissioning.
Guidance for installers on explaining operation and safety to users.
Recommended procedures and frequency for annual boiler servicing.
Steps for safely removing the boiler's front cover for maintenance.
Explanation of the boiler's self-diagnostic system and fault code sequences.
To Next Page
