Need help?Do you have a question about the Morco FEB-24ED and is the answer not in the manual?
General| Output | 24 kW |
|---|---|
| Heat Output | 24 kW |
| Voltage | 230 V |
| Frequency | 50 Hz |
| Thermostat | Yes |
| Safety Features | Flame Failure Device, Overheat Protection |
| Fuel Type | Natural Gas |
| Water Flow Rate | 11 liters/min |
| Hot Water Production | 12 l/min at 35°C rise |
| Gas Connection | 1/2" |
| Water Connection | 1/2" |
| Flue Diameter | 100 mm |
| Material | Steel |
Key specifications and features of the FEB-24ED model.
Overview of the boiler's operational principles and basic setup.
Details the water circulation system and its components within the boiler.
Identifies and describes the function of various hydraulic parts.
Explains the role of the expansion vessel and automatic bypass.
Details the main printed circuit board and its connection points.
Covers anti-freeze, antiblock, and overheating safety features.
Explains the intelligent control system for optimizing gas usage.
Describes the function of thermistors and the high limit thermostat.
Identifies and describes gas valve and spark generator functions.
Guide to accessing and configuring boiler settings via the installation menu.
Details fan, air pressure switch, and flue venturi for combustion air.
Guide to the diagnostic and configuration tool for service.
Explains how to interpret fault codes and recent fault history.
Lists and explains various fault codes and their potential causes.
Step-by-step diagnostic guides for common boiler operational issues.
Instructions for removing and replacing the complete hydraulic unit.
Guidance on changing the plate heat exchanger and 3-way valve diaphragm.
Steps for replacing the circulation pump and DHW thermistor.
Outlines the step-by-step processes for DHW, heating, and re-start.
Visual representation of the boiler's electrical connections and components.
To Next Page
