Need help?Do you have a question about the Morco EUP6 and is the answer not in the manual?
General| Model | EUP6 |
|---|---|
| Type | Instantaneous gas water heater |
| Safety Features | Flame failure device, overheat protection |
| Water connection | 1/2" BSP |
| Fuel Type | LPG |
| Water Flow Rate | 6.0 l/min |
| Water flow | 6.0 l/min |
Essential safety rules and precautions for using the appliance.
General introduction and description of the Morco EUP6 and EUP11 water heaters.
Explains how the water heater produces hot water on demand.
Details the procedure for starting the appliance and basic operation.
Advises on procedures to prevent damage from freezing conditions.
Provides detailed physical dimensions for EUP6 and EUP11 models.
Identifies and lists all components of the EUP6 and EUP11 models.
Presents detailed technical specifications for gas and water parameters.
Outlines the legal regulations governing gas appliance installation.
Provides guidance and warnings for mounting the device on a wall.
Details essential requirements for air supply and flue gas removal.
Explains how to correctly connect the appliance to the gas supply.
Describes the process of connecting the water heater to the water supply.
Covers requirements for flue gas output and safety devices.
Step-by-step instructions for safely removing the appliance's outer casing.
Provides a guide to diagnose and resolve common operational issues.
Detailed procedures for initial setup, testing, and final checks.
Advises on preventing lime scale build-up in hard water areas.
Outlines essential annual maintenance tasks for optimal performance.
Instructions for cleaning the main burner as part of annual maintenance.
Steps for cleaning the heat exchanger to maintain efficiency.
Guidance on cleaning the pilot burner and injector for reliable ignition.
Explains the process of draining the system to prevent frost damage.
Lists specific conditions and damages not covered by the product warranty.
To Next Page
