6 7
SAFETY PRECAUTIONS PLACEMENT AND INSTALLATION
INCORRECT INSTALLATION
• It is important to keep the exhaust pipe
smooth. Incorrect installation will affect the
proper functioning of the A/C unit.
• Prevent the exhaust pipe from bending.
• Ensure air can flow unobstructed inside the
pipe.
INSTALLATION
• Secure the exhaust pipe assembly to the air
outlet in the back panel (anti-clockwise).
WARNING: The exhaust duct is designed especially for this model. DO NOT attempt to
replace or lengthen it to prevent a malfunction.
NOTICE: Maximum length of the exhaust pipe is 1,500mm. It is advisable to shorten it
and keep it in a horizontal position during installation.
INSTALLATION
• Insert the air exhaust hose
into the window sealing
plate, adjust opening width
of window so that the
window and sealing plate
corresponds correctly. The
length of the sealing plate
is adjustable.
SPECIAL WARNING
• Always operate the unit in an upright position and place it on a flat, level surface to
ensure optimal compressor operation.
• The A/C unit should be stationed at least 50cm away from surrounding objects.
Keep air inlets and outlets unobstructed.
• DO NOT operate the A/C unit near gasoline or any other inflammable liquids.
• DO NOT use spraying agent and other solvent or flammable substances directly
onto the A/C unit to prevent damaging the electrical components or deforming the
unit’s plastic exterior.
• If the power cord is damaged, it must be replaced by an electrician or specialized
technician authorized by the manufacturer in order to prevent a fire hazard.
• Insert the power cord into the power supply first, and then press the power key to
operate the A/C.
KEEP THIS USER MANUAL IN A SAFE PLACE FOR FUTURE REFERENCE.
PLACEMENT AND INSTALLATION
PLACEMENT
• Place it on an even and dry surface, and keep it at least 50cm away
from surrounding object(s).
To Next Page
Loading...