Page5
FOLDER
DocuFoldMk2
12. ‘Check’ will appear on the control panel display. If the check sheets are folded correctly,
move the feed switch (U) to the off position.
13. Zero the counter by pressing the set-up switch (W) upwards. If you require to batch, the
Docufold provides the facility to batch in denominations of 10’s from 10 to 1000.
To set batch, you can select the required batch number by turning the feed switch (U) to
off & then rotating the select knob (V) until the required batch quantity appears in the
control panel display.
14. Push the feed switch down to pulse to start the machine feeding the paper.
To Next Page
Loading...
