Page 22
CREASING / BOOKLET MAKING
Rear Paper Guide
Sliding Back
Infeed Tray
Front Paper Guide
Setting the Machine up as a Booklet Maker
Paper Guide Adjustment Lever
Stop
(On Underside Of Infeed Tray)
Adjusting the Paper Guides
Adjusting the Sliding Back Stop
Inse he infeed tray of the Booklet Maker. Adjust the width
of the paper guides, by sliding the lever (on the underside of the infeed tray)
forwards or backwards until the sample sheet slides freely in the guides.
With the sample sheet in its downward resting position, adjust the sliding back
stop until it is approximately 5mm to 10mm clear of the back edge of the sample
sheet.
rt a sample sheet into t
To Next Page
Loading...
