mori seiki MSG-501 User Manual

A-18 DAILY INSPECTION
Type C
1) Place the main power switch in the [OFF] position.
2) While pushing the shutter plates in the direction of arrows, attach a padlock.
Type D
1) Place the main power switch in the [OFF] position.
2) Put a driver into the release screw.
When the release screw is not prepared, just pull out the lock plate.
3) While turning the driver CCW, pull out the lock plate.
4) Attach a padlock.
Shutter plate
NOTE
Driver
Lock plate

mori seiki MSG-501 Specifications

General

Brand	mori seiki
Model	MSG-501
Category	Lathe
Language	English