mori seiki MSG-501 User Manual

B-22 REGULAR INSPECTION
14. CHANGING THE BATTERY
The machine or gantry-type loader has two types of batteries: for memory backup and for
absolute position sensing. If the battery voltage is low, the battery alarm message is displayed on
the screen. If this alarm indication is given, change the batteries by following the procedure
indicated below.
For MSC-801, refer to the MAINTENANCE INFORMATION published separately.
<Battery to be used>
Type NC Unit Memory Back-up Battery
Absolute Position Sensing
Battery
Type 1
MSC-515
Alkaline battery/Manganese
battery × 2 pcs.
(Size R20, products on the
market)
Alkaline battery/Manganese
battery × 4 pcs.
(Size R20, products on the
market)
*2
Lithium battery
E67028 [A06B-6073-K001]
*2
MSD-515
MSC-500
MSC-501
MSD-501
MSD-501II
MSG-500
MSG-501
MSC-516
MSD-516
MSD-516II
MSC-518
MSD-518
MSD-518II
MSC-521
SEICOS Σ21L
MSX-501
MSX-501III
MSX-502
MSX-502III
MSX-500
MSX-500III
MSX-511
MSX-511III

mori seiki MSG-501 Specifications

General

Brand	mori seiki
Model	MSG-501
Category	Lathe
Language	English