P-2
<Example>
Ordering the limit switch for checking the tailstock clamp/unclamp in the SL-25A/500
(1) Check the MACHINE MODEL and SERIAL No. on
the ELECTRICAL RATING plate attached to the
electrical cabinet.
MACHINE MODEL: SL-25A/500
SERIAL No.: 2501
(2) Check the drawing No. (ORDER No.), quantity (Qt.),
and part name (PART NAME) of the parts on the
parts list.
ORDER No.: E66044A
QUANTITY: 1
PART NAME: SWITCH
If the ORDER No. of the electric part is not clear,
inform the manufacturer name and model of the
part. These are mentioned on the part.
(3) Check the page number of the parts list on which the
part name is mentioned.
Page P-30.
(4) Check the number of revisions mentioned in the last
page of the parts list.
Number of revisions: SL259308C15
(5) Please inform the items checked by (1) - (4) to the
representative.
No. ORDER No. PART NAME Qt. REMARK
61 Y60110A HEX. NUT 4 M10-1
62 Y34450A SOCKET SCREW (CONE) 4 M10 × 50
63 E66044A SWITCH 1 SHL-Q2255-01
64 Y20525A PAN HEAD SCREW 2 M4 × 5
ELECTRICAL RATING
MACHINE MODEL : SL 25A5
SERIAL NO. : 2501
PHASE : 3
MADE IN JAPAN
95 76 77
63 64 65 66
67
68 69
70
71
72
73
54
55
56
57
58
59
60
61
62
74 75
NOTE
To improve this manual, we invite you to make comme
manual. We want to know how you think we can make
those concerning this manual only.
Comment Form
Name of manual PARTS LIST for SL-25
SL259308C15
Number of revisions
Name
Department
Address
To Next Page
Loading...
Need help?
General
