B-40 REGULAR INSPECTION
16. ADJUSTING THE OIL SKIMMER SEPARATION TANK DRAIN
(OPTION)
If oil is not being removed from the separation tank or coolant is being removed with the waste oil
into the oil pan, adjust the height of the drain adjustment nut according to the following procedure.
<Adjustment interval >
As required
<Procedure>
(Example: Win Product P/N31600)
1) If oil is not being removed from the oil pan, rotate the
adjustment nut to the right to lower the height of the
drain.
2) If coolant is being removed with the waste oil into the
oil pan, rotate the adjustment nut to the left to raise
the height of the drain.
This completes the procedure for adjusting the separation
tank drain adjustment nut.
The method of adjustment may differ depending
on the machine model.
Drain adjustment nut
Oil panSeparation tank
Drain adjustment nut
NOTE
To Next Page
Loading...
Need help?
General
