mori seiki NL2500/1250 User Manual

HX-NL_4-C2JPEN
2011.06.P
ίަˁཟ೫ᝢ஥ం
MAINTENANCE MANUAL
ᤛႊൡሗ
Applicable Model
ᤛႊҤᚽᏚ
Applicable NC Unit
NL1500/500 NL1500MC/500 NL1500Y/500
NL1500S/500 NL1500SMC/500 NL1500SY/500
NL2000/500 NL2000MC/500 NL2000Y/500
NL2000S/500 NL2000SMC/500 NL2000SY/500
NL2500/700 NL2500MC/700 NL2500Y/700
NL2500S/700 NL2500SMC/700 NL2500SY/700
NL2500/1250 NL2500MC/1250 NL2500Y/1250
NL2500S/1250 NL2500SMC/1250 NL2500SY/1250
NL3000/700 NL3000MC/700 NL3000Y/700
NL3000/1250 NL3000MC/1250 NL3000Y/1250
NL3000/2000 NL3000MC/2000 NL3000Y/2000
NL3000/3000 NL3000MC/3000 NL3000Y/3000
M720BM (MSX-850IV)
ൡಽɁ଩ͽǾίަȝɛɆʡʷɺʳʩʽɺɥᚐșҰȾǾȭࣷᇋǾҤᚽᏚ
ʫ˂ɵ˂ȝɛɆյࠖൡبʫ˂ɵ˂Ɂ՘ᝢ஥ంɥྏᝣȪǾю߁ɥԚґျᜓ
ȪȹȢȳȨȗǿ
ɑȲǾ՘ᝢ஥ంɂጦ܅ȪȽȗɛșȾ۾ҒȾίከȪȹȢȳȨȗǿ
Before starting operation, maintenance, or programming, carefully read the
manuals supplied by Mori Seiki, the NC unit manufacturer, and equipment
manufacturers so that you fully understand the information they contain.
Keep the manuals carefully so that they will not be lost.

mori seiki NL2500/1250 Specifications

General

Brand	mori seiki
Model	NL2500/1250
Category	Lathe
Language	English

Summary

FOR SAFE MACHINE OPERATION

PRECAUTIONS FOR OPERATORS

SAFETY DEVICES

MACHINE OPERATION

MAINTENANCE AND INSPECTION

CHAPTER 1 REGULAR MAINTENANCE

REGULAR INSPECTION LIST

SPINDLE WARM-UP

COOLANT UNIT

Precautions for selecting coolant and unit maintenance.

HYDRAULIC UNIT

Precautions, checks, and replacement procedures for the hydraulic unit.

LUBRICATING UNIT

Procedures for replenishing lubricant and cleaning filters.

OIL TEMPERATURE CONTROLLER

Procedures for cleaning air filter, condenser, and replacing cooling oil.

PNEUMATIC DEVICES

ELECTRICAL CABINET

CHIP CONVEYOR (OPTION)

HIGH PRESSURE COOLANT UNIT (OPTION)

CHAPTER 2 TROUBLESHOOTING

ALARM MESSAGE

Information on NC and PLC alarms, and how to interpret them.

INPUT/OUTPUT SIGNAL CONFIRMATION PROCEDURE

MALFUNCTIONS AT MAIN POWER ON

Troubleshooting steps for issues occurring after turning on main power.

WHEN BATTERY REPLACEMENT REQUESTED

Procedures for replacing NC memory and servo batteries.

ZERO POINT RETURN COMMAND ALARM TRIGGERED

Procedure to recover from zero point return command alarms.

SOFT-OVERTRAVEL ALARM

How to cancel soft-overtravel alarms.

COOLANT UNIT PROBLEMS

Troubleshooting common issues with the coolant unit.

HYDRAULIC UNIT ALARMS

LUBRICATING UNIT ALARMS

OIL TEMPERATURE CONTROLLER ERRORS

ALARM RELATED TO TURRET

WHEN SUB-STANDARD MACHINING OCCURS

Procedures for addressing sub-standard machining.

TOOL PRESETTER STYLUS BREAK STEM REPLACEMENT

REMOVING CHIPS ENTANGLED IN WORKPIECE