mori seiki NL2000 User Manual

USERS' MANUAL
MANUAL DEL USUARIO
Applicable Model
Modelo afectado
NL1500
NL2000
NL2500
NL3000
Before starting operation, maintenance, or programming, carefully read the
manuals supplied by Mori Seiki, the NC unit manufacturer, and equipment
manufacturers so that you fully understand the information they contain.
Keep the manuals carefully so that they will not be lost.
UM-NL-G0ESEN
Antes de iniciar la utilización, mantenimiento o programación, lea
detenidamente los manuales facilitados por Mori Seiki, el fabricante del CN y
los fabricantes de los equipos para poder asegurarse de que comprende
íntegramente la información contenida en los mismos.
Guarde los manuales con sumo cuidado de modo que no se pierdan.
Applicable NC Unit
Aplicable a Las Unidades CN
MSX-850
MSX-850III

mori seiki NL2000 Specifications

General

Brand	mori seiki
Model	NL2000
Category	Lathe
Language	English

Summary

USERS' MANUAL

Signal Word Definition

CHAPTER 1 BASIC OVERVIEW

4 TURNING ON/OFF POWER

Details the procedure for powering the machine on and off.

4-1 Power ON Sequence

Step-by-step guide for powering up the machine.

5 ZERO RETURN OPERATION

Explains how to return machine axes to their home positions.

5-1 Manual Zero Return Operation for X-Axis, Z-Axis and Y-Axis (Y-Axis Specifications)

Describes the manual procedure for returning axes to zero.

6 OPENING/CLOSING DOOR

Covers procedures for safely opening and closing the machine door.

6-1 Door Lock Prevention Key

Explains the function and use of the door lock prevention key.

7 DOOR INTERLOCK FUNCTION

7-1 Door Interlock for Standard Specifications

Explains door interlock behavior for standard machine specifications.

7-2 Releasing Door Interlock Function

Describes how to temporarily release the door interlock for specific operations.

8 TOOL MOUNTING PROCEDURE

8-1 Preparation for Mounting Tool

Details the preparatory steps before mounting a tool or holder.

8-2 Mounting Holder

Explains the procedure for mounting tool holders onto the turret head.

8-3 Mounting Tool

Outlines the steps for installing a tool into a holder.

9 PREPARING THE MANUAL IN-MACHINE TOOL PRESETTER

9-1 Installing and Removing the Manual In-Machine Tool Presetter Arm (Detachable Type, Spindle 2 Side)

Details the installation and removal of the tool presetter arm.

10 TOOL GEOMETRY OFFSET VALUE MEASUREMENT/ENTRY WITH MANUAL IN-MACHINE TOOL PRESETTER

10-1 Measurement Procedure with the Manual In-Machine Tool Presetter

Step-by-step guide for measuring tool geometry offset.

12 SETTING WORKPIECE ZERO POINT (Z0)

13 CHUCKING

13-1 Clamping/Unclamping Chuck

Explains the operation of the chuck for clamping and unclamping.

13-2 Adjusting the Chucking Pressure

14 JAW SHAPING

14-3 Automatic Soft Jaw Shaping

15 TAILSTOCK

15-2 How to Use the Digital Tailstock

15-2-1 Digital Tailstock Setting

CHAPTER 2 MACHINE OPERATIONS

1-2 Electrical Cabinet Door

1-2-1 Opening Electrical Cabinet Door

1-2-2 Main Power Switch

Explains the function and operation of the main power switch.

2 MACHINE OPERATION PANEL

2-1 Operation Selection Key-Switch

2-3 Automatic Operation Buttons

2-4 NC Function Buttons

2-6 Spindle/Milling Buttons

2-6-2 Spindle Rotation Buttons

2-6-3 Spindle Speed Setting Buttons

2-6-5 Starting and Stopping Spindle/Rotary Tool Spindle Rotation

2-7 Axis Feed Buttons

2-7-3 [One-touch Zero Return] Button

2-8 Feedrate Override Switch

2-9 Rapid Traverse Rate Override Switch

2-10-2 Manual Pulse Generator

2-11 [Turret Indexing] Button

2-12 [Automatic Power Shutoff] Button

2-15 Chip Conveyor Buttons (Chip Conveyor Specification)

2-16 [Door Unlock] Button

2-18 Coolant Buttons

4 FUNCTION SELECTION KEYS AND DISPLAY SCREENS

4-1-1 Current Position (Absolute Coordinate) Screen

4-1-2 Current Position (Relative Coordinate) Screen

4-2-1 Program Check Screen

Screen used for checking programs before execution.

4-3-1 Tool Geometry Offset Screen

Screen for setting and measuring tool geometry offset.

4-3-2 Tool Wear Offset Screen

Screen for inputting tool wear offset data.

4-3-3 Work Offset Screen

Screen for setting and managing workpiece coordinate systems.

4-3-4 Jaw Shape Management Screen

4-3-5 Soft Jaw Cutting Screen

4-3-6 Turret Index Screen