mori seiki NL3000/3000 User Manual

HX-NL_4-C2JPEN
2011.06.P
ίަˁཟ೫ᝢ஥ం
MAINTENANCE MANUAL
ᤛႊൡሗ
Applicable Model
ᤛႊҤᚽᏚ
Applicable NC Unit
NL1500/500 NL1500MC/500 NL1500Y/500
NL1500S/500 NL1500SMC/500 NL1500SY/500
NL2000/500 NL2000MC/500 NL2000Y/500
NL2000S/500 NL2000SMC/500 NL2000SY/500
NL2500/700 NL2500MC/700 NL2500Y/700
NL2500S/700 NL2500SMC/700 NL2500SY/700
NL2500/1250 NL2500MC/1250 NL2500Y/1250
NL2500S/1250 NL2500SMC/1250 NL2500SY/1250
NL3000/700 NL3000MC/700 NL3000Y/700
NL3000/1250 NL3000MC/1250 NL3000Y/1250
NL3000/2000 NL3000MC/2000 NL3000Y/2000
NL3000/3000 NL3000MC/3000 NL3000Y/3000
M720BM (MSX-850IV)
ൡಽɁ଩ͽǾίަȝɛɆʡʷɺʳʩʽɺɥᚐșҰȾǾȭࣷᇋǾҤᚽᏚ
ʫ˂ɵ˂ȝɛɆյࠖൡبʫ˂ɵ˂Ɂ՘ᝢ஥ంɥྏᝣȪǾю߁ɥԚґျᜓ
ȪȹȢȳȨȗǿ
ɑȲǾ՘ᝢ஥ంɂጦ܅ȪȽȗɛșȾ۾ҒȾίከȪȹȢȳȨȗǿ
Before starting operation, maintenance, or programming, carefully read the
manuals supplied by Mori Seiki, the NC unit manufacturer, and equipment
manufacturers so that you fully understand the information they contain.
Keep the manuals carefully so that they will not be lost.

mori seiki NL3000/3000 Specifications

General

Type	CNC Lathe
Tool Capacity	12
Turret Stations	12
Z-Axis Travel	1380 mm
Tool Shank Size	25 mm
Spindle Motor	AC

Summary

FOR SAFE MACHINE OPERATION

3 FIRE PREVENTION AND COUNTERMEASURE

4 SAFETY DEVICES

Details on the machine's safety devices and their function.

7 MACHINE OPERATION

Procedures and guidelines for operating the machine safely.

CHAPTER 1 REGULAR MAINTENANCE

2 REGULAR INSPECTION LIST

Comprehensive list of regular inspection items and their intervals.

7 MACHINING CHAMBER

9 SPINDLE WARM-UP

10 COOLANT UNIT

Precautions and procedures for selecting, using, and maintaining the coolant unit.

11 HYDRAULIC UNIT

Guidelines for maintenance and inspection of the hydraulic unit.

12 LUBRICATING UNIT

Procedures for replenishing lubricant and cleaning filters for the lubricating unit.

13 OIL TEMPERATURE CONTROLLER

15 SEMI DRY-CUT SYSTEM (OPTION)

16 PNEUMATIC DEVICES

17 ELECTRICAL CABINET

Overview of the electrical cabinet and procedures for opening/closing its door.

18 CHIP CONVEYOR (OPTION)

19 HIGH PRESSURE COOLANT UNIT (OPTION)

CHAPTER 2 TROUBLESHOOTING

1 ALARM MESSAGE

Explanation of NC and PLC alarms and how to interpret them.

3 MALFUNCTIONS AT MAIN POWER ON

Troubleshooting steps for malfunctions occurring after turning on the main power.

4 WHEN BATTERY REPLACEMENT REQUESTED

Procedures for replacing machine batteries when a replacement message is displayed.

5 ZERO POINT RETURN COMMAND ALARM TRIGGERED

Recovery procedure for zero point return command alarms.

6 SOFT-OVERTRAVEL ALARM

7 COOLANT UNIT PROBLEMS

8 HYDRAULIC UNIT ALARMS

9 LUBRICATING UNIT ALARMS

10 OIL TEMPERATURE CONTROLLER ERRORS

11 ALARM RELATED TO TURRET

12 WHEN SUB-STANDARD MACHINING OCCURS

Procedures for addressing issues causing sub-standard machining.

14 TOOL PRESETTER STYLUS BREAK STEM REPLACEMENT