mori seiki NL2500 User Manual

USERS' MANUAL
MANUAL DEL USUARIO
Applicable Model
Modelo afectado
NL1500
NL2000
NL2500
NL3000
Before starting operation, maintenance, or programming, carefully read the
manuals supplied by Mori Seiki, the NC unit manufacturer, and equipment
manufacturers so that you fully understand the information they contain.
Keep the manuals carefully so that they will not be lost.
UM-NL-G0ESEN
Antes de iniciar la utilización, mantenimiento o programación, lea
detenidamente los manuales facilitados por Mori Seiki, el fabricante del CN y
los fabricantes de los equipos para poder asegurarse de que comprende
íntegramente la información contenida en los mismos.
Guarde los manuales con sumo cuidado de modo que no se pierdan.
Applicable NC Unit
Aplicable a Las Unidades CN
MSX-850
MSX-850III

mori seiki NL2500 Specifications

General

Maximum Turning Diameter	366 mm
Number of Tools	12
X-Axis Travel	260 mm
Main Motor Power	18.5/15 kW
Tool Shank Size	25 mm
Spindle Motor Power	15 kW
Chuck Size	10 inch
Spindle Nose	A2-6
Turret Type	Drum Type
Rapid Traverse Rate (X/Z)	30/30 m/min

Summary

CHAPTER 1 BASIC OVERVIEW

1 OPERATION ROUTE MAP

4 TURNING ON/OFF POWER

Details the procedures for turning the machine power on and off.

5 ZERO RETURN OPERATION

Describes the procedures for returning all axes to the zero point.

6 OPENING/CLOSING DOOR

Explains how to open and close the operator door and related safety precautions.

7 DOOR INTERLOCK FUNCTION

7-1 Door Interlock for Standard Specifications

Details the door interlock function for standard specifications.

7-2 Releasing Door Interlock Function

Explains how to release the door interlock function.

7-3 Door Interlock Function (CE Specification)

Details the door interlock function for CE specifications.

8 TOOL MOUNTING PROCEDURE

8-2 Mounting Holder

8-3 Mounting Tool

9 PREPARING THE MANUAL IN-MACHINE TOOL PRESETTER

9-1 Installing and Removing the Manual In-Machine Tool Presetter Arm (Detachable Type, Spindle 2 Side)

9-2 Interlocks for Using the Manual In-Machine Tool Presetter

Details the interlocks for using the manual in-machine tool presetter.

10 TOOL GEOMETRY OFFSET VALUE MEASUREMENT/ENTRY WITH MANUAL IN-MACHINE TOOL PRESETTER

10-1 Measurement Procedure with the Manual In-Machine Tool Presetter

10-2 Distance from Spindle Center Line to X-Axis Zero Point (I.D. Tool Holders and Rotary Tools)

13 CHUCKING

13-1 Clamping/Unclamping Chuck

13-2 Adjusting the Chucking Pressure

15 TAILSTOCK

15-1 Preparing the Tailstock (Common to Digital and Programmable Tailstocks)

15-2 How to Use the Digital Tailstock

Explains the usage of the digital tailstock.

15-3 How to Use the Programmable Tailstock (NL3000/2000, 3000/3000)

Details the usage of the programmable tailstock.

17 CUTTER RADIUS OFFSET

17-1 Requirement for Using the Cutter Radius Offset Function

17-2 Technical Terms Used in the Explanation of the Cutter Radius Offset Function

18 SETTING TOOL NOSE RADIUS OFFSETS

18-2 Offset for Taper Cutting and Chamfering

CHAPTER 2 MACHINE OPERATIONS

1 POWER-RELATED

2 MACHINE OPERATION PANEL

Details the layout and functions of the machine operation panel.