mori seiki NL3000MC/3000 User Manual

HX-NL_4-C2JPEN
2011.06.P
ίަˁཟ೫ᝢ஥ం
MAINTENANCE MANUAL
ᤛႊൡሗ
Applicable Model
ᤛႊҤᚽᏚ
Applicable NC Unit
NL1500/500 NL1500MC/500 NL1500Y/500
NL1500S/500 NL1500SMC/500 NL1500SY/500
NL2000/500 NL2000MC/500 NL2000Y/500
NL2000S/500 NL2000SMC/500 NL2000SY/500
NL2500/700 NL2500MC/700 NL2500Y/700
NL2500S/700 NL2500SMC/700 NL2500SY/700
NL2500/1250 NL2500MC/1250 NL2500Y/1250
NL2500S/1250 NL2500SMC/1250 NL2500SY/1250
NL3000/700 NL3000MC/700 NL3000Y/700
NL3000/1250 NL3000MC/1250 NL3000Y/1250
NL3000/2000 NL3000MC/2000 NL3000Y/2000
NL3000/3000 NL3000MC/3000 NL3000Y/3000
M720BM (MSX-850IV)
ൡಽɁ଩ͽǾίަȝɛɆʡʷɺʳʩʽɺɥᚐșҰȾǾȭࣷᇋǾҤᚽᏚ
ʫ˂ɵ˂ȝɛɆյࠖൡبʫ˂ɵ˂Ɂ՘ᝢ஥ంɥྏᝣȪǾю߁ɥԚґျᜓ
ȪȹȢȳȨȗǿ
ɑȲǾ՘ᝢ஥ంɂጦ܅ȪȽȗɛșȾ۾ҒȾίከȪȹȢȳȨȗǿ
Before starting operation, maintenance, or programming, carefully read the
manuals supplied by Mori Seiki, the NC unit manufacturer, and equipment
manufacturers so that you fully understand the information they contain.
Keep the manuals carefully so that they will not be lost.

mori seiki NL3000MC/3000 Specifications

General

Brand	mori seiki
Model	NL3000MC/3000
Category	Lathe
Language	English

Summary

FOR SAFE MACHINE OPERATION

1 FOR USERS AND SUPERVISORS

2 PRECAUTIONS FOR OPERATORS

Essential safety precautions for machine operators to prevent injury.

3 FIRE PREVENTION AND COUNTERMEASURE

Procedures and precautions for preventing fires and responding to emergencies.

4 SAFETY DEVICES

7 MACHINE OPERATION

8 MAINTENANCE AND INSPECTION

CHAPTER 1 REGULAR MAINTENANCE

1 IMPORTANCE OF INSPECTIONS

2 REGULAR INSPECTION LIST

A comprehensive list of inspection items and their intervals.

4 OILS

9 SPINDLE WARM-UP

10 COOLANT UNIT

11 HYDRAULIC UNIT

12 LUBRICATING UNIT

16 PNEUMATIC DEVICES

17 ELECTRICAL CABINET

CHAPTER 2 TROUBLESHOOTING

1 ALARM MESSAGE

Explains how to interpret and respond to alarm messages displayed by the NC.

2 INPUT/OUTPUT SIGNAL CONFIRMATION PROCEDURE

3 MALFUNCTIONS AT MAIN POWER ON

Troubleshooting steps for malfunctions occurring after turning on the main power.

4 WHEN BATTERY REPLACEMENT REQUESTED

5 ZERO POINT RETURN COMMAND ALARM TRIGGERED

Procedure to resolve alarms related to zero point return command failures.

6 SOFT-OVERTRAVEL ALARM

Explanation and resolution for soft-overtravel alarms that stop axis movement.

7 COOLANT UNIT PROBLEMS

Troubleshooting common issues related to the coolant unit.

8 HYDRAULIC UNIT ALARMS

Troubleshooting common alarms and issues within the hydraulic unit.

9 LUBRICATING UNIT ALARMS

Troubleshooting common alarms and issues related to the lubricating unit.

10 OIL TEMPERATURE CONTROLLER ERRORS

11 ALARM RELATED TO TURRET

Troubleshooting specific alarm conditions related to the turret.

12 WHEN SUB-STANDARD MACHINING OCCURS

Procedures for addressing issues leading to sub-standard machining quality.

14 TOOL PRESETTER STYLUS BREAK STEM REPLACEMENT

15 REMOVING CHIPS ENTANGLED IN WORKPIECE