8
Using Your Health Fryer Manually (Continued)
Press the Program Button
(G)
and select
program 1 within the pre-programmed
settings. This will activate the pre-heat
function. When the pre-heat is complete, it will
automatically switch off the Health Fryer.
Remove the Drawer from the Health Fryer
(see Step 1).
Place the food into
the Frying Basket (10),
Frying Pan (11) or Cake Tin (12) and repeat Step
3. Do not put oil or food into the Drawer (4).
Repeat step 5 to switch back on. Using the
Temperature Adjust Buttons
(A & B)
, select the
correct temperature for the food to be cooked.
The temperature will be set at 180°C, and the
time at 10 minutes as an automatic default.
Using the Time Adjust Buttons
(C & D)
, select
the desired time for the food to be cooked.
Press the Start / Pause Button
(F)
and the
Health Fryer will begin cooking your food.
When the time is up on the timer, the Health Fryer will beep and automatically turn off.
If the food is not cooked to your desired requirements, repeat Steps 7-10.
Tip: Check your food at two minute intervals to ensure food is not overcooked.
Either remove the entire basket (see Step 2), or carefully use plastic or wooden utensils to remove
your food.
Press and hold the On / Stop Button
(E)
until
the Touch Control Panel
(2)
illuminates.
DF480001 MUK Rev1.qxp_Layout 1 12/04/2016 14:16 Page 8
To Next Page
Loading...
