4
Features
(1) Beaker (x2)
(2) Blade
(3) Blade Lid
(4) Main Unit
(5) Control Knob
(6) Cap (x2)
(7) Safety Seal
• There is a Safety Seal (7) in place on the Blade
Lid
(3). This is to prevent leakage from your Easy
Blend when in use and for when the Beaker (1) is
upside down.
• When inserting the Safety Seal, ensure that it is
pressed tightly into the channel in the Blade Lid.
Ensure the Safety Seal is correctly located
before the Beaker is screwed onto the Blade Lid.
• After screwing the Blade Lid onto the Beaker,
look inside to check the Safety Seal is securely
fitted before attaching to the Main Unit.
• Always ensure the Safety Seal is in place before
use. Failure to do so could cause damage to the
appliance.
• The Safety Seal only needs to be removed for
cleaning. After cleaning ensure the seal is
reinserted as directed before using the Easy
Blend.
To Next Page
Loading...
