Morphy Richards Easy Blend 48415 - Before first use; Using the Easy Blend

5
4
Attach the Blade Lid to the Main Unit (4). Align
the open padlock and arrow and twist to lock
into place.
3
2
Add the ingredients to the Beaker (1). Do not
exceed the 750ml level.
1
WARNING: Ensure your Easy Blend is
unplugged from the mains before use.
5
Plug into the mains. Turn the Control Knob (5)
to the desired speed High (II), Low (I), or Pulse
(P). Your Easy Blend will begin to blend.
6
When finished, turn the Control Knob to the
Off (O) position and unplug from the Mains.
Using the Easy Blend
Ensure the Safety Seal (7) is fitted correctly.
Attach the Blade Lid (3) to the Beaker. Screw
to fix into place securely.
Before first use
W
ARNING: Sharp blades, handle with care.
B
efore using for the first time or if un-used for a
long period, wash your Easy Blend thoroughly
b
efore use.
1. R
emove the Safety Seal
(
7)
f
rom the Blade Lid
(
3)
.
2. W
ash all parts except the Main Unit
(
4)
i
n hot
soapy water and dry thoroughly. Do not allow the
B
lade Lid to stand in water.
FP48415 MUK Rev3.qxp_Layout 1 26/11/2014 10:28 Page 5