Version 2 31/03/2021
Memory cooking
This function allows three bespoke cooking programs to be stored into the
memory of the microwave for use at future times.
To store a cooking program
1. To store a program into the first memory position, press the
0/MEMORY pad ONCE and ‘1’ will be displayed.
2. Enter the desired cooking program in the usual way and press the
START/+30SEC pad to store the program into the memory.
3. To store a program into the second memory position, press the
0/MEMORY pad TWICE and ‘2’ will be displayed and repeat step 2 for
the next cooking program.
4. To store a program into the third memory position, press the
0/MEMORY pad THREE TIMES and ‘3’ will be displayed and repeat
step 2 for the last cooking program.
To access a stored program
1. Press the 0/MEMORY pad once to access program 1, twice to access
program 2 etc. The display will show the program selected.
2. Place the food to be cooked in a suitable container for the cooking
program to be used, place into the oven and close the door.
3. Press the START/+30SEC pad to begin the program.
4. Cooking can be interrupted to stir contents or check cooking progress
as usual.
Notes:
If microwave is unplugged or power is lost, the program will be lost
and need to be re-entered.
One memory location can include a multistage program
Auto cook and quick start cannot be pre-programmed.
•
•
•
To Next Page
Loading...
