Version 2 31/03/2021
Parts and assembly
1. Interlocking catches
3. Turntable shaft
4. Control panel
5. Door with viewing panel
6. Glass turntable
7. Grill Rack
8. Grill element
9. Door release button
2. Turntable roller
2
3
4
6
1
5
9
7 8
• Ensure all packaging materials, protective film and adhesive
tape are removed and check the oven and door for any
damage. Do not remove the waveguide cover.
• Assemble as shown above and ensure that the glass
turntable is correctly positioned on the shaft and roller.
• When using the microwave do not fit the grill rack.
• When using the grill, place the grill rack onto the glass
turntable.
• Always check for damage before using the grill rack. It is
not advised to use the rack when microwave or
combination cooking.
• The grill rack is not allowed to be used in combi cooking.
To Next Page
Loading...
