6
• O
ccasionally you may wish to clean the blade.
• Firstly, turn the Blending Jug (15) upside down
(
see image) and unscrew the Blade Base
(
16)
.
Turn anti-clockwise until loose then remove.
• Clean the Blade with the aid of a small brush,
in warm, soapy water and dry.
WARNING: Sharp Blades
• To reassemble, follow the instruction above in
reverse order. Ensuring the Seal Ring (17) is
correctly fitted on the Blade Base (16).
Tighten the Blade Base (16) until secure.
Blade Cleaning
To Next Page
Loading...
