Morphy Richards IB172020 User Manual

5
2
Without placing any Filters (18/19/20) into the
Filter Holder
(21) , place the Filter Holder into the
Brewing Head
(10) and turn until at a right angle
to the Main Unit to lock into position securely.
1
Ensure the Water Tank (8) is filled up to the MAX line.
Assemble the Espresso Coffee Machine as above,
ensuring the Removable Drip Tray
(15) is in place.
3
Before First Use
IMPORTANT: I
t is important that prior to using the coffee maker for the first time that water is
f
lushed through the system and it is primed for making coffee.
N
OTE: You may hear a pumping sound when water is passing through the system for the first time.
T
his is normal and is caused by the air escaping from the system. The noise will cease after around
20 seconds.
5
Priming the Coffee Machine
4
Following action no.4, wait for the Two Cup and One
Cup Buttons
(2/3) to illuminate solidly. Then place a
receptacle, capable of holding 150ml, on the Drip
Tray Grid
(11) and press the Two Cup Button (2).
6
Water will pass through the system into the
receptacle, which then must be emptied. Repeat a
further 3 times, the coffee machine is now primed
for making coffee.
Ensure the Steam Control Dial (6) is in the off
position and press the On/Standby Button
(4).
The Two Cup and One Cup Buttons
(2/3) will
pulse as the unit is heating up
.
When the Two Cup and One Cup Buttons (2/3)
illuminate solidly, place the Steam Wand (12) into
a mug or jug and slowly turn the Steam Control
Dial
(6) until water dispenses, keep the Dial open
for at least 30 seconds and close the Dial. Take
care performing this process as the hot water will
pulse into the receptacle, and it may emit steam.
Dispose of the water and repeat the process a
further two times.
CM172020MUK Rev2.qxp_Layout 1 02/12/2020 13:49 Page 5

Morphy Richards IB172020 Specifications

General

Brand	Morphy Richards
Model	IB172020
Category	Coffee Maker
Language	English