5
• The drawer must be fully inserted into the grooves on the top
of the housing cavity using the drawer handle until a click is
heard.
• Unplug from outlet when not in use and before cleaning. Allow
to cool completely before removing or adding parts, and
before cleaning the appliance.
• Do not operate any appliance with a damaged lead or plug, or
after an appliance has malfunctioned, or has been dropped or
damaged in any way.
Treating scalds
• Be careful of hot oil or steam, as it can be ejected from the
appliance.
• Run cold water over the affected area immediately. Do not
stop to remove clothing, seek medical advice quickly.
Electrical requirements
• WARNING: This appliance should NOT be used with extension
leads and/or power boards.
• Check that the voltage on the rating label of your appliance
corresponds with your house electricity supply which must be
A.C.
READ CAREFULLY AND KEEP FOR FUTURE REFERENCE
CAUTION: HOT SURFACE
PLEASE BE AWARE OF HOT SURFACES
HANDLE WITH CARE
To Next Page
Loading...
