Morso 2140 - Installing Your Morsø Stove; Unpacking the Stove; Installing the Stove; Chimney Sweep

To Next Page

To Previous Page

DK ENG

1.0 Installing your Morsø stove Page no.

1.1 Unpacking the stove 21

1.2 Installing the stove 21

1.3 Chimney sweep 21

1.4 Location of the stove/distance requirements 21

1.5 The chimney 22

1.6 Pipe connections 23

1.7 Connecting to a brick chimney 24

1.8 Connecting to a steel chimney 24

1.9 Draught 25

2.0 Firing/using the stove 26

2.1 Lighting instructions and fuelling intervals 27

3.0 Routine stove maintenance 30

3.1 External maintenance 30

3.2 Internal maintenance 30

3.3 Cleaning the stove 31

Enjoy your new Morsø stove!

Morsø, the biggest stove company in the Danish mar-

ket, has been making wood-burning stoves of the

highest quality since 1853. Just follow the instructions

below, and we are certain that you will be able to use

and enjoy your new stove for many years.

Additional accessories

Morsø also oers a comprehensive line of oor plates and accessory products that can fa-

cilitate the safe and ecient operation and maintenance of your Morsø stove.

Cast iron

Cast iron is a live material. There are no two ovens that are identical. This is partly due to the

tolerances of the casting process, partly because the ovens are a work of craftsmanship.

Minor unevennesses may also occur in the cast iron surface.

Contents

1.0 Installing your Morsø stove

1.1 Unpacking your stove

2140: After removing the outer packaging, unbolt the combustion chamber from the wood-

en pallet and place it gently on its back. The cardboard packaging can be placed underneath

to prevent marring. Remove the leg pack from the stove and bolt each leg/panel securely

to the underside of the base on the combustion chamber, using the bolts provided (found

inside the stove).

We recommend that two people perform the assembly and installation procedure.

The Morsø 2110 weighs 120 kg.

The stove is intended for intermittent use.

1,2 Installing the stove

The stove and chimney installations MUST comply to all current National and Local Building Regu-

lations; your approved Morsø dealer or your local building control ocer can advise regarding this.

Ultimately, it is you and your installer who is responsible that the installation complies.

1.3 Chimney sweep

It may also be wise to consult your local chimney sweep before installing the stove. After your

stove has been installed, it is advisable to have the chimney checked and swept at least once a

year. In any case, if your chimney has not been used for some time, it should be inspected for

cracking, bird nests, etc. before it is put back into use.

1.4 Stove placement/clearance requirements

Minimum Clearance requirements apply if the stove is placed near to combustible materials.

Permitted clearances to combustible materials are also indicated on the data plate on the

rear of the stove.

Minimum distances from ammable material:

Type of stove

Behind the stove

(A)

To the sides of

the stove (B)

Above the

stove

45° corner (C)

Morsø 2140

uninsulated ue

200 mm 400 mm 500 mm 100 mm

Morsø 2140

insulated ue

150 mm 400 mm 500 mm 100 mm

45°

Min. afstand til brandbar hjørnevæg for Morsø 2100

Revisions

Rev.

Sign.:

Title:

Drawing no.:

Dim. without indication of margin acc. to DS/ISO 2768-1 m

1:10

Afstand til hjørnevæg

Distance to Corner wall

Morsø 2100

RSV

01.12.2009

Dimension Skecth

Date of print: 30-09-2016

C:\Users\tol\Documents\TempSWBackupDirectory\AutoRecovery\AutoRecover Of Afstand til hjørnevæg.SLDASM

2100-203 a

Itemno.:

This drawing is Morsø Jernstøberi A/S' property and must not be sold, lended or copied without any written authorization from the company.

Material:

Weight:

Model no.

Drawingtype:

Location of file:

Scale:

Format:

Released:

Construction:

Date:

Side 4 of 4