10
ENG
5. Normal reloading should be done while there are still
coals left. Spread the coals over the bottom but con-
centrated mostly at the front of the stove.
6. Place a piece of wood across the coals in one layer, with
spacing of roughtly 1 cm between the logs.
7. When the air supply is opened all the way and the door
is closed, the new fuel will ignite in a few minutes.
8. Once the new fuel has taken, adjust the air amount to
the desired setting; optimal combustion will continue un-
til glowing coals are produced. Under normal chimney
draft conditions, expect to refuel your stove every 90 -
100 minutes.
9. A new charge of wood can be added by repeating steps
5 & 6.
To Next Page
Loading...
