12
There are 5 sounds for the camera:
1. Short welcome melody * - the sound of turn on the camera.
2. Two short sounds “Beep Beep” – standby mode for
connecting the camera to a mobile device via the «Smart
Life» application
3. Long single sound - Reading a QR code from your mobile
device.
4. Short melody * - loss of Wi-Fi signal or lack of Internet.
5. Single short beep - Reset of the camera settings (by
holding the Reset button for 5-10 seconds)
* - Note: You can nd all audio examples on our website
morvelli.com or use direct link of QR code.
To Next Page
Loading...
