Need help?Do you have a question about the Mosa TS 500 PS-BC and is the answer not in the manual?
Defines danger levels (DANGEROUS, WARNING, CAUTION, IMPORTANT, NOTE, ATTENTION) for potential hazards.
Explains symbols for STOP, GENERAL ADVICE, HIGH VOLTAGE, FIRE, HEAT, EXPLOSION, WATER, SMOKING, ACIDS, WRENCH, PRESSURE.
Lists prohibitions (e.g., use safety clothing, avoid water) and advice (e.g., use safety tools).
Guidelines for immediate first aid and fire prevention measures, including extinction means.
Crucial safety rules for welding, including electrical hazards, insulation, and PPE.
Critical advice for transporting the machine, including engine state, battery, fuel, and lifting methods.
Mandatory grounding procedures for safety against indirect contacts and protection against indirect contacts.
Daily checks, start-up sequence, and preheating procedures for the engine.
Steps for stopping the engine normally, emergency shutdown, and running-in precautions.
Safety precautions for welding, including electrical hazards, electromagnetic interference, and cable length.
Safety rules for performing maintenance, including stopping the engine and using PPE.
Detailed list of maintenance tasks and their recommended intervals (hours/months).
General| Protection Class | IP23 |
|---|---|
| Welding Process | MMA (Stick), TIG |
| Open Circuit Voltage | 80 V |
| Fuel | Petrol |
| Input Voltage | 3 x 400 V |
| Input Frequency | 50/60 Hz |
To Next Page