EasyManua.ls Logo

Motech LPS 305 User Manual

Motech LPS 305
22 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
LPS 305
Linear Programmable Power Supply
Users Manual
Question and Answer IconNeed help?

Do you have a question about the Motech LPS 305 and is the answer not in the manual?

Motech LPS 305 Specifications

General IconGeneral
BrandMotech
ModelLPS 305
CategoryPower Supply
LanguageEnglish

Summary

GENERAL INFORMATION

Introduction

General description, performance specs, options, and accessories.

Safety Considerations

Crucial safety precautions for operation, service, and repair, including warnings, symbols, and handling of hazardous conditions.

Options

Lists available options such as RS-232 Interface and Rack mount Shelf.

Accessories

Lists standard accessories provided with the power supply.

Output Isolation

Explains output isolation from earth ground and floating capabilities.

Specifications

Detailed technical specifications for the LPS 305 power supply, including performance, characteristics, and RS232 interface capabilities.

INSTALLATION

Introduction

Instructions for checking, mounting, and connecting the power supply to AC power.

Initial Inspection

Steps for inspecting the power supply for damage after unpacking.

Location and Cooling

Guidelines for proper placement and ventilation for optimal operation.

Input Power Requirements

Information on voltage and frequency requirements for operating the power supply.

Line Fuse

Instructions on locating and accessing the line fuse for replacement.

GETTING STARTED

Front Panel Controls

Detailed description of front panel controls, keys, and their functions for operation.

LCD Display Messages

Explains the LCD display messages, status annunciators, and their meanings.

Rear Panel

Details the rear panel components like AC socket, fuseholder, RS-232C interface, and label.

OPERATION

Initial Conditions

Describes the power supply's state upon AC voltage application and self-test.

Output Function Control

How to program voltage and current settings using front panel controls, including step functions and mode changes.

Enabling/Disabling Output

How to turn the +output, -output, and 5V/3.3V outputs on and off.

Overload Protection

Explains overload protection for 5V/3.3V outputs and how to reset it.

CALIBRATION

Calibration Steps

Step-by-step guide for calibrating the power supply using a DMM.

USER MAINTENANCE/SERVICE

Fuse Replacement

Instructions for inspecting and replacing the unit's fuse.

In Case of Difficulties

Troubleshooting steps for common operational issues and error messages.

ERROR#2 on LCD

Procedure to resolve "ERROR#2" by recalibrating the EEPROM.

RS-232-C Serial Interface

How to set up and use the RS-232-C interface for remote control, including command structure and status interpretation.

Related product manuals