MotionGrey Ergo2 Series

Other manuals for MotionGrey Ergo2 Series

Assembly Instruction2 pages

Need help?

Do you have a question about the MotionGrey Ergo2 Series and is the answer not in the manual?

Summary

General Safety and Operating Notes

Key Precautions and Specifications

Covers operating voltage, temperature, connection, usage, and safety warnings.

Device Restart and Initial Setup

Memory Function Settings

Standing Memory Setting

Save your preferred standing desk height.

Seated Memory Setting

Save your preferred sitting desk height.

Sit Reminder Feature

Setting the Reminder

Configure timed reminders for posture changes.

Adjusting in Reminder State

Modify desk height while reminder is active.

The MotionGrey Ergo2 Series is a height-adjustable desk designed for versatile use in various environments. It features an electric lift system that allows users to seamlessly switch between sitting and standing positions, promoting a healthier and more dynamic work or study experience.

Function Description:

The Ergo2 Series desk is primarily designed to provide ergonomic flexibility. Its core function is to adjust the height of the desktop to suit the user's preferred sitting or standing posture. This is achieved through an integrated control box and motor system, which facilitates smooth and controlled ascent and descent. The desk incorporates a "Sit Reminder" feature to encourage regular movement and prevent prolonged sedentary periods. It also includes a "Memory Function" that allows users to save their preferred standing and sitting heights for quick and convenient adjustment. A "Device Restart" function is available for initial setup or troubleshooting, ensuring the desk operates within its calibrated range. The control box screen features an "Auto-off" function to conserve energy after a period of inactivity.

Important Technical Specifications:

Operating Voltage: AC100~240V, with a frequency of 50/60HZ. This wide voltage range makes the desk suitable for use in various regions with different electrical standards.
Operating Temperature Range: -0~40°C. This indicates the desk is designed to function reliably across a typical range of indoor ambient temperatures.
Height Adjustment Mechanism: Electric motor-driven system.
Control Interface: Digital display with "△" (up), "∇" (down), "M" (memory), and "RST" (reset) buttons.

Usage Features:

Device Restart: Upon initial power-on or for troubleshooting, users can press any "△" or "∇" key, then press and hold the "RST" key (or simultaneously press both "△" and "∇") until "- - -" appears on the screen. The desk will then descend to its lowest point and rise 2cm, completing the setup.
Desk Elevation (Manual Control):
- Ascent: Long-press the "△" button for 3 seconds to automatically ascend to the standing memory height. Continuing to hold "△" will cause the desk to ascend to its highest point.
- Descent: Long-press the "∇" key for 3 seconds to automatically descend to the sitting memory height. Continuing to hold "∇" will cause the desk to descend to its lowest point.
Memory Function:
- Standing Memory Setting: Adjust the desk to the desired standing height, then long-press the "M" button until "s-" displays. Press the "△" button; the screen will flash for 2 seconds, confirming the setting.
- Seated Memory Setting: Adjust the desk to the preferred sitting height, then long-press the "M" key until "s-" displays. Press the "∇" key; the screen will flash for 2 seconds, confirming the setting.
- Important Note: The standing memory height must be higher than the sitting memory height for the settings to be stored successfully.
Sit Reminder:
- Setting the Reminder: Press any "△" or "∇" key to activate the screen, then press the "M" button. The screen will cycle through "30/45/60" minutes. Selecting an option confirms the setting. The display will flash "Chr" for 1 minute when the time is up. After three successive reminders without use, the screen will turn off.
- Disabling the Reminder: Press the "M" key when the screen displays the digital height.
- Adjusting in Reminder State: Use "△" or "∇" keys to modify the height while in the sedentary reminder state; the reminder timing will restart.
Auto-off: The control box screen automatically turns off after 25 seconds of inactivity, except when in sedentary reminder mode.

Maintenance Features:

Troubleshooting Steps: If issues arise with the control box, users are advised to:
1. Disconnect and reconnect both the power cable and the motor cable of the control box.
2. Perform the "Device Restart" procedure (press any "△" or "∇" key, then long-press "RST" or simultaneously press "△" and "∇" until "- - -" displays). This recalibrates the desk and resolves many common issues.
General Care:
- Ensure all power lines are securely connected before use.
- Regularly assess the surroundings to ensure no obstacles are above or below the desk during operation.
- Avoid using the desk if any cables or electrical components are damaged.
- The desk is not designed for mobile use; if relocation is necessary, precautions should be taken to prevent damage.
- Slight trembling during ascent and descent is considered normal and does not affect the desk's lifespan.
- This item is not intended for use by children and requires adult supervision.