• Start key
1. Function description: start the motor to run
2. Operation instructions: When the electronic watch is in full
manual operation mode, press this button to start the motor
• Stop key
1. Function description: stop the motor running
2. Instructions: When the electronic watch is running,
press this button to stop the motor
• Speed +/- key
1. Function description: speed value adjustment during operation,
parameter value adjustment during parameter setting
2. Operation instructions: When the electronic watchis in the
running state, the running speed value can be adjusted
IV. Button Function and Operation Instructions
• Manual mode function
1. Enter the manual mode: After the electronic watch is powered on and fully
displayed, it enters the full manual operation mode. At this time, press the
start button to enter the operation of the manual operation mode.
2. Running instructions: The initial running speed is 1.0KM/H, the time,
distance, and calorie windows are counted positively from zero,
according to the speed.
Adjust key to adjust the size of the running speed value. If no one is
running for about eight seconds, the system will automatically shutdown.
V. Description of Sports Mode
06
To Next Page
Loading...