To Next PageTo Next Page
Need help?Do you have a question about the MOTO GUZZI California Titanium and is the answer not in the manual?
General| Displacement | 1064 cc |
|---|---|
| Transmission | 5-speed |
| Fuel System | Electronic fuel injection |
| Front Suspension | Telescopic fork |
| Front Brake | Dual disc |
| Rear Brake | Single disc |
| Engine Type | V-Twin, 4-stroke |
| Torque | 94 Nm @ 5000 rpm |
| Seat Height | 780 mm |
| Fuel Capacity | 19 liters |
| Power | 74 hp @ 6400 rpm |
Legal requirements for driving, including license, age, psychophysical ability, insurance, and registration.
Recommendations for wearing approved helmets and protective clothing, preferably brightly colored for visibility.
Guidelines for loading luggage close to the center of gravity, distributing weight evenly, and securing it firmly.
Details on engine type, configuration, bore, stroke, displacement, and compression ratio.
Information on the transmission system and the motorcycle's frame and suspension.
Description of key switch positions, indicators, and warning lights for various models.
Location and operation of the starter button and engine stop switch on the right handlebar.
Description of the gear change pedal and its operation for different gears.
Location of the fuse box and a description of each fuse's function and rating.
Essential checks before starting the engine, including fuel, oil, ignition, and warning lights.
Step-by-step instructions for starting the engine from cold or warm, including choke and clutch operation.
Instructions for changing gears, braking, and throttle control while riding and stopping.
Instructions for adjusting the clutch lever and brake pedals for optimal performance.
Procedures for checking brake pad wear, brake disc condition, and fluid levels.
Instructions for checking and topping up brake fluid levels, and fluid replacement intervals.
How to adjust hydraulic damping for rebound and compression on the front fork.
Instructions for adjusting the hydraulic damping or spring pre-load on the rear shock absorbers.
Step-by-step guide for removing the front wheel, including brake caliper and spindle.
Instructions for removing the rear wheel, including muffler, brake caliper, and drive components.
Importance of tyre condition, tread depth, and pressure for stability and safety.
Precautions for washing the vehicle, including covering sensitive parts and avoiding high-pressure water.
Guidelines for storing the vehicle for extended periods, including cleaning and battery care.
Procedure for checking engine oil level and performing oil changes at specified intervals.
Instructions for checking gearbox oil level and performing oil changes.
Instructions for changing the front fork oil, including intervals and oil type.
Overview of the injection-ignition system, including fuel, air, and electrical circuits.
Description of normal engine operation, including ECU calculations for fuel injection and ignition timing.
Details on how the ECU manages fuel pump, throttle angle, and engine temperature during startup.
Instructions for checking, cleaning, and replacing spark plugs, including proper installation.
List of components that make up the motorcycle's electrical system.
Information on battery voltage, capacity, charging, and how to access it.
Guidelines for safely recharging the battery using a constant voltage charger.
Procedure for replacing headlight bulbs, including safety precautions.
Procedure for replacing bulbs in tail lights and direction indicators.
Steps to replace bulbs for tachometer and odometer units.
Steps to remove dashboard components and replace the bulb.
Key to the electrical system wiring diagram, listing components in Italian, English, French, and German.
List of fuses with their amperage ratings and corresponding electrical functions in English and German.
