Need help?Do you have a question about the MOTO GUZZI California 1400 and is the answer not in the manual?
General| Engine Type | 90° V-twin, 4-stroke |
|---|---|
| Displacement | 1380 cc |
| Transmission | 6-speed |
| Fuel Tank Capacity | 20.5 liters |
| Seat Height | 740 mm |
| Max Power | 96 HP (71 kW) at 6500 rpm |
| Cooling System | Air and oil cooled |
| Front Suspension | Telescopic hydraulic fork |
| Rear Suspension | Double shock absorber |
| Front Brake | Dual 320 mm discs |
| Rear Brake | 282 mm disc |
| Fuel System | Electronic fuel injection |
| Front Brakes Calipers | Brembo 4-piston |
| Rear Brakes Calipers | Brembo 2-piston |
Essential safety guidelines for operating, maintaining, and handling vehicle fluids and components.
General recommendations for vehicle repair, dismantling, and reassembly procedures.
Detailed technical specifications for the engine, including bore, stroke, and capacity.
Technical details of the frame construction, headstock angle, and suspension travel.
Specifications for braking systems, wheels, tyres, and inflation pressures.
Procedures for checking electrical connectors, continuity, ground, and voltage.
Steps for removing, diagnosing, and troubleshooting the Engine Control Unit (ECU).
Diagnostic procedures and troubleshooting for various sensors like speed, RPM, and throttle position.
Procedures for removing, disassembling, and assembling the gearbox.
Procedure for removing, inspecting, and assembling crankshaft and connecting rods.
Procedure for assembling pistons into cylinders and related checks.
Procedures for setting cam timing and adjusting valve clearance.
Steps for removing, checking, and disassembling the front wheel and fork assembly.
Procedures for removing, checking, and inspecting rear wheel and final drive unit components.
Procedure for adjusting steering bearing play and torque settings.
Schematic, pinout, and fault diagnosis guide for the ABS system.
Procedures for component maintenance, disc inspection, and brake pad replacement.
Procedures for bleeding front and rear brake hydraulic circuits using diagnostics.
Procedure for removing and installing the fuel tank and associated parts.
Procedures for removing and installing the instrument panel and headlight assembly.
Procedures for installing side panniers, bumper kits, and luggage racks.
Comprehensive checklist of inspections before delivering the motorcycle to the customer.
Checklist for verifying fluid levels in various systems and road test procedures.
Procedures for installing anti-theft device and heated handgrips accessories.
To Next Page