Need help?Do you have a question about the MOTO GUZZI California III and is the answer not in the manual?
General| Brand | MOTO GUZZI |
|---|---|
| Model | California III |
| Category | Motorcycle |
| Language | English |
Detailed engine specifications including bore, stroke, capacity, and compression ratio.
Describes the O.H.V. push rod operated rocker arm mechanism.
Details the type and model of carburetors used on the motorcycle.
Explains the lubrication system, including pressure, filters, and sensors.
Specifies the location and rating of the generator/alternator.
Covers ignition system type, timing, points gap, and spark plugs.
Details the electric starter motor and its operation.
Outlines the transmission system, including clutch and primary drive.
Describes the gearbox type and speed configuration.
Details the cardan shaft final drive ratios and overall ratios.
Specifies the frame type as a modular duplex tubular cradle.
Describes the front telescopic forks and rear swinging arm suspension.
Lists rim sizes for the cast light alloy wheels.
Specifies front and rear tyre sizes and types.
Details front and rear brake systems, including discs, calipers, and master cylinders.
Provides key dimensions and the dry weight of the motorcycle.
Outlines maximum speed, fuel consumption, and riding advice.
Policy on using approved spares and warranty implications.
Identifies dashboard lights, gauges, and the key switch.
Describes light switches, horn, indicators, starter, and stop buttons.
Explains throttle, clutch, brake levers, choke, and foot controls.
Details fuel filler cap, fuel tap, fuse box, and pannier mounting.
Covers seat lock, steering lock, and side stand safety features.
Step-by-step instructions for washing and drying the vehicle.
Guidelines for preparing and storing the motorcycle for extended periods.
Essential checks before riding and procedures for cold and warm engine starts.
Guidance on gear shifting, braking, and safe stopping procedures.
Instructions for parking safely, including lights and steering lock.
Advice for the first kilometers to ensure proper engine and component bedding-in.
Tasks to perform after the initial running-in, including oil changes.
How to adjust clutch lever play and check brake pad wear.
Procedures for checking, changing brake fluid, and bleeding the system.
Adjusting the rear/left-front brake pedal and lever stop.
Step-by-step guide for removing the front wheel.
Instructions for rear wheel removal and importance of wheel balancing.
Recommends tyre pressures for various loads and provides tyre fitting advice.
Details engine oil checking, changing, and filter replacement.
Covers checking and changing oil for the gearbox and rear transmission box.
Lists lubrication points for various components and the specified grease.
Details carburetor models, settings, and control operations.
Covers air filter, fuel tank, tap, and pipe cleaning and adjustment procedures.
How to check and adjust valve clearances for optimal engine performance.
Maintenance of contact breakers and checking ignition timing.
Specifications for ignition advance and recommended spark plugs.
Information on battery access, charging, and regular maintenance.
Guides for replacing bulbs in headlights, tail lights, and indicators.
Procedures for replacing bulbs in the instrument panel and speedometer.
Lists the power rating for various motorcycle bulbs.
Key data for electronic ignition and procedures for timing the engine.
To Next Page
