11
English
OPTIONAL EQUIPMENT
A wall mount bracket (part number: NNTN6844) is available for the Multi-Unit
Charger. Contact your local dealer to order this item. Installation is shown
below.
Mounting Multi-Unit Charger to Wall Bracket
Figure 5
1. Mount bracket to wall using appropriate fasteners in 4 locations
(fasteners not included in kit).
2. Install two M4x25 screws (included in kit) through bracket into charger
base as shown. Do not over tighten the screws.
SERVICE
The Multi-Unit Charger is not user repairable. Replacements should be ordered
from your local dealer.
Tel: 1-800-422-4210 (US & Canada)
Tel: 1-847-538-8023 (International)
Attach to wall in four
locations (fasteners
not provided)
M4x25 screw – two
locations (provided)
68012009052_.book Page 11 Monday, July 19, 2021 4:02 PM
To Next Page
Loading...
