Motorola solutions ST7500 - Connecting the Radio in Normal Mode; Figure 8: Connecting the Radio in Blank Flash Mode (2 of 2)

Figure 8: Connecting the Radio in Blank Flash Mode (2 of 2)
+veGND +veGND
3
4
1
2
No. Description
1 Personal Computer
2 Power Supply 3.8 V
3 Serial Data Cable
4 Programming Cable
4.2.2
Connecting the Radio in Normal Mode
The function of this mode is for radio normal power-up and programmng cable connection between the
radio and the PC(Tetracom).
Procedure:
1 Push the switch to the middle.
2 Connect the radio and the PC with the programming cable.
3 Power on the radio.
MN004528A01-AF
Chapter 4: Test Setup and Testing
41