Figure 37: Inserting the OLED Display Jacket........................................................................................84
Figure 38: Attaching the Front Keypad Board Connector.......................................................................84
Figure 39: Installing the Internal Antenna Module Assembly................................................................. 85
Figure 40: Checking the Vibrator Spring, Internal Antenna Spring, Speaker/Bottom Mic Spring,
Earpiece Flex Spring, PTT and Side Buttons Spring.........................................................................85
Figure 41: Inserting the OLED Flex Connector...................................................................................... 86
Figure 42: Insert the Main Board............................................................................................................ 86
Figure 43: Inserting the Top Flex and the Bottom Connector Flex Connector....................................... 86
Figure 44: Checking the Thermal Pad and Butterfly Clips......................................................................87
Figure 45: Installing the Back Housing................................................................................................... 87
Figure 46: Attaching the Main Screws....................................................................................................87
Figure 47: Placing a New Tamper Label................................................................................................ 88
Figure 48: Inserting the Battery.............................................................................................................. 88
Figure 49: Unlock State.......................................................................................................................... 88
Figure 50: Attaching the Battery Cover.................................................................................................. 89
Figure 51: Locking the Battery Cover..................................................................................................... 89
Figure 52: Installing the Antenna............................................................................................................89
Figure 53: Vacuum Leak Test Setup...................................................................................................... 91
Figure 54: Radio in Leak Test Fixture.................................................................................................... 92
MN004528A01-AF
List of Figures
7