interchangeably depending on your preference and
the programmed functions.
• Clearing all Bluetooth devices information via the
preprogrammed Bluetooth On/Off button:
a) Long press the preprogrammed Bluetooth
On/Off button.
You hear a short, medium-pitched tone. The
display shows Please wait to indicate
clearing is in progress.
If successful, the display shows All BT
devices cleared.
If unsuccessful, you hear the radio sounds a
short, low-pitched tone. The display shows
Clear all BT devices failed. The display
returns to Bluetooth feature screen.
• Clearing all Bluetooth devices information via the
radio menu Clr:
a)
or to Devices and press the Menu
Select button directly below Clr.
You hear a short, medium-pitched tone. The
display shows Clear all BT devices?.
b) Press the Menu Select button directly below
Yes to proceed.
The display shows
Please wait to indicate
clearing is in progress.
If successful, the display shows All BT
devices cleared.
If unsuccessful, you hear the radio sounds a
short, low-pitched tone. The display shows
Clear all BT devices failed. The display
returns to Bluetooth feature screen.
Note: If Re-Pair Timer is set to infinite and you clear
keys on the radio, you must clear keys on all
previously paired devices as well. (Please see your
accessories manual for further details.)
Editing the Bluetooth Friendly Name
Your radio must be preprogrammed to allow you to
use this feature.
1
or to BT. Press the Menu Select button
directly below BT to access the Bluetooth feature
screen.
2
or to Friendly name and press the
Menu Select button directly below Edit.
To Next Page
Loading...
