TOP DISPLAY:
In addition to the large color display on the front of
the radio, the APX 6000 also have a smaller monochromatic
display on the top of the radio.
This small display is observable to the user when the radio is
worn on the duty belt and can eliminate the need to remove
the radio from its holster to change talk-groups or setting.
The functionality of the small display mimics that of the larger
display and many of the icons are the same, albeit in black-and-
white. On the top display, the selected zone and talk-group will
alternate and flash continuously.
It is possible to flip the display so that the text is easier to
understand to the user when the radio is worn on a duty belt.
To flip the display, press and hold the two-dot button located
on the side of the radio (inset). The top display will change to
all red when an emergency call is received; it will change to all
green when a private call or page is received.
TOP DISPLAY ICONS:
ICON DESCRIPTION ICON DESCRIPTION ICON DESCRIPTION
Displays the RSSI. The more bars,
the stronger the signal.
You are tuned to a talkgroup in
your scan list that is currently
broadcasting.
Displays the battery level.
The radio is transmitting.
If displayed in the F Zone, the
radio is in direct mode. If absent in
the F Zone, the radio is in repeater
mode.
Battery increments will drop as
battery is depleted.
Blinking: Radio is in a programming
mode.
Radio is set to high power by
default; cannot be changed.
Battery display will flash when
battery level is critical.
Solid: Encryption is turned on.
Blinking: The radio is receiving an
encrypted transmission.
Bluetooth is on and ready for a
Bluetooth connection.
A scan list is populated and the
radio is currently scanning.
Radio is currently connected to
external Bluetooth accessory.
To Next Page
Loading...
Need help?
General
