Motorola APX 6000 Guide

PAIRING A BLUETOOTH DEVICE:
If the feature is enabled and the radio possesses the proper
internal hardware, the APX 4000/6000 radio is capable of
wirelessly connecting with Bluetooth devices such as
speakers and shoulder or bone microphones.
To enable a Bluetooth device, press the menu select button
under “BT” on the menu bar, then select “On” from the menu
bar once you are in the Bluetooth menu. Pair the device by
touching the blue dot on the powered-up device to the blue
dot on the radio. You may have to press and hold the
wireless device’s power button to enter the pairing mode.
Wireless ear devices will often verbally prompt the user on
what to do to pair it to the radio. When the wireless device is
turned on but not paired, it will say “to pair, touch blue dots.”
Once the blue dots are touched together, the radio will beep
to inform you of a successful connection and the device itself
will advise “headset connected."
If Bluetooth is turned on within the radio, but no device is
paired with it, the small Bluetooth icon next to the battery
gauge will be grey (as shown) and the Bluetooth menu will
indicate that no device is paired with it.
Once a wireless device has been successfully paired, the grey
icon will turn blue and the menu will indicate the connected
device (as shown).
Blue
Dot

Motorola APX 6000 Specifications

General

Frequency Range	700/800 MHz, VHF, UHF Range 1, UHF Range 2
IP Rating	IP67
P25 Phase 1 & 2	Yes
GPS	Yes
Encryption	AES, DES
Power Output	1-3 Watts (700/800 MHz)
Operating Temperature	-30°C to +60°C
Intrinsically Safe	Yes
Bluetooth	Yes (Bluetooth 4.0)