Motorola APX 6000

Important: For Secure Radios Only – After a total
of 17 consecutive incorrect passwords (turning the
radio off and on does not reset this number), the
radio erases all of its encryption keys and shows
Deadlock. See a qualified radio technician.
If you forget the password, enter ******** to erase
all keys and revert the password in the radio back
to the default password of 01234567.
Changing Your Password
1
or to Pswd.
2 Press the Menu Select button directly below
Pswd.
The display shows Change Password screen.
3
or to Unlock Pswd.
4
Press the Menu Select button directly below Sel.
5 Enter the old password.
6
Press the Menu Select button directly below Ok.
7 Enter the new password.
8
Press the Menu Select button directly below Sel.
9 Re-enter the new password.
10
Press the Menu Select button directly below Sel.
The password is updated.
If the two passwords do not match, repeat Steps 5
through 10.
Note: If you enter three incorrect old passwords, the
radio exits the password feature. You cannot access
this feature again until you turn the radio off and on.
Changing Your Tactical Inhibit Password
1
or to Pswd.
2 Press the Menu Select button directly below
Pswd.
The display shows Change Password screen.
3
or to Tactical Inh Encode Pswd.
4
Press the Menu Select button directly below Sel.
5 Enter the old password.
Advanced Features
120
English