Motorola APX 6500 - Transmitting While the Scan Is on

APX 6500 O5 CH
33
NEXT > < PREV CONTENTS
 Scan
Transmitting While the Scan is On
ADVANCED FEATURES
Radio Programmed for Talkback Scan
Procedure:
1 Press the PTT button to transmit on the channel indicated
by the display.
The radio does not begin scanning again for a predetermined
hang time after you release the PTT button, allowing the
other party to respond.
If the other party responds within the hang time, scanning
does not resume until the full hang time expires after they
have finished speaking, allowing the conversation to be
completed.
To transmit on the selected channel if another channel is
active, first turn scan off by pressing the Menu Select button
below Scan momentarily.
Radio Programmed for Non-Talkback Scan
Procedure:
1 Press the PTT button at any time to transmit on the
selected channel or fixed channel.
To make a Call Alert page, or Private Conversation call while
scanning, press either the Menu Select button directly below
PAGE or CALL.
The call is entered on the selected channel and scanning is
halted until the call is exited by pressing or pressing the
Menu Select button below either PAGE or CALL.